xSPI Multiple Bus Memory Controller (xSPI-MBMC) v3.3.x

for JEDEC xSPI Profile 1.0 NOR Flash and STT-MRAM devices

SLL partners and supported JEDEC xSPI Profile 1.0 memory device vendors

xSPI MBMC v3.3.x product overview

SLL’s xSPI Multiple Bus Memory Controller (xSPI MBMC) v3.3.x IP supports provides full support for:

The low pin count (11 to 12 user I/O pins) memories offer good performance with lower hardware and power costs.  Memory device variants offer up to 2 Gigabit NOR Flash, up to 200 MHz DDR clock speeds, with a x8 wide data path, and {6 mm x 8 mm} and {8 mm x 8 mm} BGA24 package options.  

SLL is a member of Micron’s Xccela Consortium, and the official partner with all the other above memory vendors.  SLL works closely with all the memory vendors to ensure SLL’s memory controller is physically qualified with their memory device variants, significantly reducing your project’s risks.

SLL’s small xSPI MBMC IP v3.3.x enables you to easily evaluate, select and adopt the benefits of the latest x8 HyperBus memories in your projects and products.

SLL provides world class pre-sales and post-sales technical support for all the major memory vendors and FPGA vendors, helping you navigate the rapidly evolving market, on the platform of your choice.

Get to market faster, with lower power consumption, lower pin count, lower cost, and far lower project risk by using SLL’s memory controller in your project/s.

xSPI MBMC v3.3.x support for FPGA and ASIC targets

This memory controller IP has been ported to, and physically tested on, a broad range of FPGA device variants, including:

  • Most modern Intel FPGA device families, including:
    • Intel MAX 10 – Up to 200 MHz DDR
    • Cyclone IV 
    • Cyclone 10 LP – Up to 200 MHz DDR
    • Cyclone 10 GX – Up to 250 MHz DDR
    • Cyclone V
    • Cyclone V SoC
    • Arria 10 – Up to 250 MHz DDR
    • Arria 10 SoC – Up to 250 MHz DDR
    • Stratix 10 – Up to 250 MHz DDR
  • Most modern Xilinx FPGA device families, including:
    • Artix-7
    • Kintex-7
    • Virtex-7
    • Zynq 7000
    • Kintex Ultrascale+
    • Zynq Ultrascale+
    • Virtex Ultrascale+ (ideal for supporting ASIC design prototyping in FPGA)
  • Microchip (Microsemi)
    • PolarFire FPGA – Up to 250 MHz DDR

Other FPGA device families may be available on request. Please contact SLL at info@synaptic-labs.com with details about the specific currently unsupported FPGA device family that you would like to use.

This memory controller IP is also currently being ported from FPGA to standard cell ASIC at up to 250 MHz DDR with x4/x8/x16 datapath support.

xSPI MBMC v3.3.x Free Trials

To request a free trial for selected FPGA device families, please visit here.

xSPI MBMC v3.3.x Capabilities

  • Includes tight integration with all the major FPGA vendor’s graphical system integration tools (Platform Designer, Vivado, …)  
  • Features high quality local interconnect, with support for the following interconnect protocols:
    • ARM AMBA AXI4 protocol
    • ARM AMBA APB3 protocol
    • Intel Avalon-MM protocol
    • other interconnect protocols available on request…
  • Includes internal clock-crossing circuitry between the local bus interconnect and the external memory channel to reduce circuit area and improve the performance of the customer’s design
  • Excellent memory access performance for both latency sensitive and bandwidth intensive applications:
    • The round trip time for read memory transfer requests through the memory controller has been optimized for latency sensitive applications, such as processor cores.
    • The memory controller supports long burst memory transfer requests over the memory channel to sustain high effective memory bandwidth (>90% efficiency of memory channel)
    • Note:  SLL offers a range of cache technologies to significantly increase the performance of  processor cores that do not have internal instruction and/or data caches when accessing external memories.
  • Features low circuit area and low SRAM usages, making SLL’s memory controller viable for use in resource constrained designs. 
  • Includes optional support for automatic configuration of memory devices at power on:
    • FPGA customers typically use the automatic configuration option
    • This dramatically simplifies integration of SLL’s memory controller in customer designs, enabling all firmware to be executed in place from x8 NOR Flash.  
  • Include support for manual configuration of the memory controller and any attached memory devices
    • ASIC customers typically use the manual configuration option
    • ASIC customers can prototype their designs in FPGA with manual configuration option enabled
  • Supports x4, x8 and x16 data path width in a single instantiation of SLL’s memory controller IP
  • Supports 2 or more instantiations of the memory controller IP in one project
    • Preliminary support for splitting AXI4 requests across 2 instances of the memory controller in parallel to double memory bandwidth is now available

xSPI MBMC v3.3.x markets, applications and use cases for NOR Flash

Customers include industrial consortia, high profile government scientific organisations, universities, Fortune Global 500’s down to SME’s around the globe, from USA to China.   Applications include commercial and industrial projects and products, such as:  Sensors, video, industrial automation, medical, transport, photonics, …   Use cases include:  eXecution in Place (XiP) of software, long burst DMA access, …

xSPI MBMC v3.3.x JEDEC xSPI Profile 1.0 memory devices

xSPI MBMC v3.3.x support for Dialog Semiconductor Octal xSPI

Status of Dialog Semiconductor ® Octal xSPI Memory (EcoXIP) device testing and qualification performed by SLL:

xSPI MBMC v3.3.x support for Everspin SPI Industrial STT-MRAM

Status of Everspin®  EM064LX xSPI Industrial STT-MRAM Persistent Memory:

  • Validation in simulation
    • To be completed in Q1-2022
  • Validation in hardware – Pending

xSPI MBMC v3.3.x support for Infineon SemperFlash with Octal Interface

Status of Infineon SemperFlash memory device testing and qualification performed by SLL:

  • Infineon Technologies AG – Semper Flash with Octal Interface
    • Physically validated:
      • S26HS512TGABHI00 /  26HS512TAI00 (512 Megabit, 1.8V)
    • Physical validation in process
      • S26HL512TFPBHI01  / 26HL512TPIO1 (512 Megabit 3.0V)
    • Physical validation in process on Trenz Board:
      • S28HS512TGABHB010  (512 Mbit, 1.8V)
      • S28HL01GTFPBHV030 ( 1 Gigabit, 3V)
      • S28HS01GTFPBHI030  ( 1 Gigabit, 1.8V)
    • Physical qualification available on customer demand
      • S26HS01GT (1 Gigabit, 1.8V)
      • S26HL01GT (1 Gigabit, 3.0V)

xSPI MBMC v3.3.x support for ISSI Octal Flash

Status of ISSI Octal Flash device testing and qualification performed by SLL:

  • Integrated Silicon Solution Inc. (ISSI) –  Octal Flash
    • Physical validation in process on Trenz board:
      • IS25LX256-JHLE (256 Mbit, 3V)
      • IS25WX256-JHLE (256 Mbit, 1.8V)
      • IS72WVO32M8AWO256-200HLA2 (256 Mbit Octal Flash, 64 Mbit Octal RAM, 1.8V)
      • IS72WVO32M8BLO256-133HLA2 (256 Mbit Octal Flash, 64 Mbit Octal RAM, 3V)
    • Support planned:
      • IS25LX064
      • IS25WX064
      • IS25LX128
      • IS25WX128
      • IS25WX256
      • IS25LX512M
      • IS25WX512M

xSPI MBMC v3.3.x support for ISSI Octal MCP

Status of ISSI Octal RAM device testing and qualification performed by SLL:

  • Integrated Silicon Solution Inc. (ISSI) –  Octal MCP:
    • Physical validation in process on Trenz board:
      • IS72WVO32M8AWO256-200HLA2 (256 Mbit Octal Flash, 256 Mbit Octal RAM, 1.8V)
      • IS72WVO32M8BLO256-133HLA2 (256 Mbit Octal Flash, 256 Mbit Octal RAM, 3V)

xSPI MBMC v3.3.x support for GigaDevice

Status of GigaDevice® NOR Flash (GD25XGD25LX) device testing and qualification performed by SLL:

  • GigaDevice® – NOR Flash (GD25XGD25LX) :
    • Validation in process on Trenz board:
      • GD25LX256EBIR          (x8, 256 Mbit, 1.8V)
      • GD25LX512MEBIRR    (x8, 512 Mbit, 1.8V)
      • GD55LX01GEBIRY       (x8, 1024 Mbit, 1.8V)
    • Validation pending in simulator
      • GD55LX02GE                 (x8, 2048 Mbit, 1.8V)
      • GD55LX512WE               (x8, 512 Mbit, 1.8V)

xSPI MBMC v3.3.x support for Macronix OctaBus™

Status of Macronix OctaBus™ device testing and qualification performed by SLL:

  • Macronix International Co., Ltd – OctaBus™:
    • Physically validated on Trenz board:
      • MX25UM512 (512 Mbit, 1.8V)
    • Physical validation in process on Trenz board:
      • MX25LM51245GXDI00  (512 Mbit, 3V)
      • MX25UM51245GXDIH0  (512 Mbit, 1.8V)
      • MX25UM51345GXDI00   (512 Mbit, 1.8V)
      • MX25UW51345GXDI00   (512 Mbit, 1.8V)
      • MX66LM1G45GXDI00     (1024 Mbit, 3V)
      • MX66UM1G45GXDI00    (1024 Mbit, 1.8V)
      • MX66UM2G45GXRI00    (2048 Mbit, 1.8V)

xSPI MBMC v3.3.x support for Micron Xccela Flash

Status of Micron Xccela Flash device testing and qualification performed by SLL:

  • Micron – Xccela Flash:
    • Physically validated:
      • MT35XU01GBBA1G12 (1 Gbit, 1.8V) 
    • Physical validation in process on Trenz board:
      • MT35XL256ABA2G12 (256 Mbit, 3V)
      • MT35XL512ABA1G12 (512 Mbit, 3V)
      • MT35XU01GBBA2G12 (1 Gbit, 1.8V)
      • MT35XU02GCBA1G12 (2 Gbit, 1.8V)

xSPI MBMC v3.3.x support for Commercial-off-the-shelf (COTS) boards

SLL has the broadest range of xSPI and xSPI-like board partners in this memory controller market.  SLL has also tested our memory controller on the broadest range of COTS and proprietary boards in the market.

SLL leverages our close relationships to deliver known-working reference designs with free trial copies of xSPI MBMC v3.3.x (that do not expire) to:  (a) reduce your project risk; and (b) get you to market faster.  SLL’s board partners include:

SLL has also run our memory controller IP on boards from other board vendors such as:

Notice to Hardware Developers using xSPI MBMC v3.3.x

  • Please validate your pin-mapping and PCB Layout for you selected memory devices with Synaptic Laboratories at info@synaptic-labs.com before manufacturing your first prototype to reduce risks.
  • Please email info@synaptic-labs.com for SLL’s guidance with regard to supporting specific FPGA device families.

Dialog Semiconductor Octal xSPI NOR Flash Resources

Everspin SPI Industrial STT-MRAM Resources

  • Everspin EM064LX is compatible with JEDEC xSPI Profile 1.0:
    •  Everspin®
    • Standards
      • JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
      • JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
      • JEDEC JESD252 – Serial Flash Reset Signaling Protocol
    • Application notes and other guidance
      • No public releases at this date
    • Data sheets:
      • EM064LX xSPI Industrial STT-MRAM Persistent Memory (unpublished)

Infineon SemperFlash with Octal Interface Resources

Infineon Semper NOR Flash with HyperBus interface has conformance with JEDEC xSPI Profile 1.0:

ISSI Octal Flash Resources

ISSI Octal MCP Resources

  • Integrated Silicon Solution Inc. (ISSI)
  • Standards
    • Macronix OctaBus for PSRAM
    • Micron Xccela Bus for NOR Flash (JEDEC xSPI Profile 1.0)
    • JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
    • JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
    • JEDEC JESD252 – Serial Flash Reset Signaling Protocol
  • Application notes and other guidance:
  • Data sheet
    • Contact ISSI for datasheets:
      • IS72WVO
        • IS72WVO16M8AWO256  (128 Mbit Octal Flash, 256 Mbit Octal RAM,   1.8V)
        • IS72WVO16M8BLO256   (128 Mbit Octal Flash, 256 Mbit Octal RAM,       3V)
        • IS72WVO16M8AWO512  (128 Mbit Octal Flash, 512 Mbit Octal RAM,   1.8V)
        • IS72WVO16M8BLO512    (128 Mbit Octal Flash, 512 Mbit Octal RAM,      3V)
        • IS72WVO32M8AWO256  (256 Mbit Octal Flash, 256 Mbit Octal RAM,   1.8V)
        • IS72WVO32M8BLO256    (256 Mbit Octal Flash, 256 Mbit Octal RAM,      3V)
        • IS72WVO32M8AWO512  (256 Mbit Octal Flash, 512 Mbit Octal RAM,   1.8V)
        • IS72WVO32M8BLO512    (256 Mbit Octal Flash, 512 Mbit Octal RAM,      3V)

GigaDevice NOR Flash (GD25X, GD25LX) Resources

  • GigaDevice NOR Flash is compatible with JEDEC xSPI Profile 1.0:

Macronix OctaBus™ Memory Resources

Micron Xccela Flash Resources

Contact SLL for information on many development board options for all these memory vendors xSPI memory devices: info@synaptic-labs.com