SLL's embedded software innovation has been recognised by our customers and partners. Major FPGA, memory, and development board makers now officially partner with SLL. This ensures SLL IP is validated on a wide range of physical devices. SLL customers are located in most geographical regions, and include Fortune Global 500's, government agencies, and SME's from USA and Canada to China.
SLL Intellectual Property Support
Memory device vendor’s resources
for HyperBus™ 1.0 and 2.0, OctaBus™, Xccela® Bus,
JEDEC® xSPI (JESD251) Profile 1.0 and Profile 2.0, …
SLL’s IP supports Xilinx FPGA devices
SLL collaborates closely with Macronix
SLL is Winbond’s partner
SLL is Trenz Electronic’s partner
SLL is JSC’s partner
SLL is an Infineon Associated Partner
SLL is GigaDevice’s partner
SLL is a Microchip (Microsemi) CompanionCore Partner
SLL is a Microchip (Microsemi) CompanionCore Partner
Overview
Please find third party resources for memory vendors and memory device variants supported by SLL’s memory controller portfolio. If a specific memory device variant has not already been physically qualified with SLL’s memory controller IP, then SLL is well positioned to do it. SLL can advise you on COTS development board options for many of the supported memory devices on Intel, Microchip (Microsemi) and Xilinx FPGA’s. SLL provides free trials with reference designs. SLL reference designs have been downloaded many thousands of times. You can request Trial IP here. You can read about some of the available COTS development board options here.
AP Memory IoT RAM (Xccela) Resources
- AP Memory
- Standards
- Micron Xccela Bus Standard for PSRAM
- Application notes and other guidance
- AP Memory, “OPI 24B/90B board design guide”, 5 March 2019.
- Request guidance by email
- AP Memory, “OPI 24B/90B board design guide”, 5 March 2019.
- Data sheets:
- APS -OB x8
- APS6408L‐OB (x8, 64 Mbit, 1.8V)
- APS6408L-OB (bare die)
- APS6408L-OBX (bare die)
- APS6408L-OB-BA (6mmx8mm 24BGA)
- APS6408L-OBX-BA (6mmx8mm 24BGA)
- APS6408L‐OBM (x8, 64 Mbit, 1.8V)
- APS6408L-OBM (bare die)
- APS6408L-OBMX (bare die)
- APS6408L-OBM-BA (6mmx8mm 24BGA)
- APS6408L-OBMX-BA (6mmx8mm 24BGA)
- APS12808L-OB (x8, 128 Mbit, 1.8V)
- APS12808L-OB-BA (6mmx8mm 24BGA)
- APS12808L-OBX-BA (6mmx8mm 24BGA)
- APS12808L‐OBR-WB (WLCSP)
- APS12808L‐OBRC (WLCSP)
- APS12808L‐OBXRC (WLCSP)
- APS12808L-OBM (x8, 128 Mbit, 1.8V)
- APS12808L-OBM-BA (6mmx8mm 24BGA)
- APS12808L-OBMX-BA (6mmx8mm 24BGA)
- APS25608N-OBRx (x8, 256 Mbit, 1.8V)
- APS25608N-OBR (bare die)
- APS25608N-OBRX (bare die)
- APS25608N-OBR-BD (6mmx8mm 24BGA)
- APS25608N-OBRX-BD (6mmx8mm 24BGA)
- APS51208N-OBRx (x8, 512 Mbit, 1.8V)
- APS51208N-OBR (bare die)
- APS51208N-OBRX (bare die)
- APS51208N-OBR-BD (6mmx8mm 24BGA)
- APS51208N-OBRX-BD (6mmx8mm 24BGA)
- APS6408L‐OB (x8, 64 Mbit, 1.8V)
- APS -OB x8, x16
- APS256XXN (x8, x16, 256 Mbit, 1.8V)
- APS256XXN-OBR (bare die)
- APS256XXN-OBRX (bare die)
- APS256XXN-OBR-BG (6mmx8mm 24BGA)
- APS256XXN-OBRX-BG (6mmx8mm 24BGA)
- APS256XXN-OBR-BE (4mmx4mm 49BGA)
- APS256XXN-OBRX-BE (4mmx4mm 49BGA)
- APS256XXN-OBR-WA (24 WLCSP)
- APS256XXN-OBRX-WA (24 WLCSP)
- APS512XXN-OBRx -BA (x8, x16, 512 Mbit, 1.8V)
- APS512XXN-OBR (bare die)
- APS512XXN-OBRX (bare die)
- APS512XXN-OBR-BG (6mmx8mm 24BGA)
- APS512XXN-OBRX-BG (6mmx8mm 24BGA)
- APS512XXN-OBR-BE (4mmx4mm 49BGA)
- APS512XXN-OBRX-BE (4mmx4mm 49BGA)
- APS256XXN (x8, x16, 256 Mbit, 1.8V)
- APS -3OB
- APS6408L-3OBx (x8, 64 Mbit, 3V)
- APS6408L-3OBM-BA (6mmx8mm 24BGA)
- APS6408L-3OBMX-BA (6mmx8mm 24BGA)
- APS12808L-3OB (x8, 128 Mbit, 3V)
- APS12808L-3OBM-BA (6mmx8mm 24BGA)
- APS12808L-3OBMX-BA (6mmx8mm 24BGA)
- APS6408L-3OBx (x8, 64 Mbit, 3V)
- APS -OB x8
AP Memory IOT RAM (OctaRAM) Resources
- AP Memory
- Standards
- Macronix Octabus Standard for OctaRAM
- Application notes and other guidance
- AP Memory, “OPI 24B/90B board design guide”, 5 March 2019.
- Request guidance by email
- AP Memory, “OPI 24B/90B board design guide”, 5 March 2019.
- Data sheets:
- APS-OC
- APS6408L-OC (64 Mbit, 1.8V)
- APS6408L-OC (bare die)
- APS6408L-OCX (bare die)
- APS6408L-OC-BA (6mmx8mm 24BGA)
- APS6408L-OCX-BA (6mmx8mm 24BGA)
- APS25608N‐OCx (256 Mbit, 1.8V)
- APS25608N-OCH (bare die)
- APS25608N-OCHX (bare die)
- APS25608N-OCH-BA (6mmx8mm 24BGA)
- APS25608N-OCH-BA (6mmx8mm 24BGA)
- APS51208N‐OCx (512 Mbit, 1.8V)
- APS51208N-OCH (bare die)
- APS51208N-OCHX (bare die)
- APS51208N-OCH-BA (6mmx8mm 24BGA)
- APS51208N-OCH-BA (6mmx8mm 24BGA)
- APS6408L-OC (64 Mbit, 1.8V)
- APS-3OC
- APS6408L-3OC (64 Mbit, 3.0V)
- APS6408L-3OC-BA (6mmx8mm 24BGA)
- APS6408L-3OCX-BA (6mmx8mm 24BGA)
- APS6408L-3OC (64 Mbit, 3.0V)
- APS-OC
Dialog Semiconductor Octal xSPI NOR Flash Resources
- Dialog Semiconductor Octal xSPI Memory is compatible with JEDEC xSPI Profile 1.0:
- Dialog Semiconductor
- Standards
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signalling Protocol
- Application notes and guidance
- Data sheets:
- ATXP032 (32 Mbit, 1.8V)
- ATXP032-CCUE-Y (24BGA)
- ATXP032-CCUE-T (24BGA)
- ATXP032-UUE-T (29WLCSP)
- ATXP032-DWF (DWF)
- ATXP064B (64 Mbit, 1.8V)
- ATXP064B-CCUE-Y (24BGA)
- ATXP064B-CCUE-T (24BGA)
- ATXP064B-UUE-T (46WLCSP)
- ATXP064B-DWF (DWF)
- ATXP128 (128 Mbit, 1.8V)
- ATXP128-CCUE-Y (24BGA)
- ATXP128-CCUE-T (24BGA)
- ATXP128-UUE-T (78WLCSP)
- ATXP128-DWF (DWF)
- ATXP032 (32 Mbit, 1.8V)
Everspin SPI Industrial STT-MRAM Resources
- Everspin EM064LX is compatible with JEDEC xSPI Profile 1.0:
- Everspin®
- Standards
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance
- No public releases at this date
- Data sheets:
- EM064LX xSPI Industrial STT-MRAM Persistent Memory (unpublished)
GigaDevice NOR Flash (GD25X, GD25LX) Resources
- GigaDevice NOR Flash is compatible with JEDEC xSPI Profile 1.0:
- GigaDevice®
- GigaDevice GD25X, GD25LX NOR Flash product pages
- Standards
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance
- Check with company for PCB board guidance
- Data sheets:
- GD25X FAMILY
- GD25X
- GD25X512ME ( 512 Mbit, 3.0V)
- GD55X
- GD25X
- GD25LX FAMILY
- GD25LX
- GD25LX256E ( 256 Mbit, 1.8V)
- GD25LX512ME ( 512 Mbit, 1.8V)
- GD55LX
- GD55LX512WE ( 512 Mbit, 1.8V)
- GD55LX01GE ( 1024 Mbit, 1.8V)
- GD55LX02GE (2048 Mbit, 1.8V)
- GD25LX
- GD25X FAMILY
- GigaDevice®
Infineon (Cypress) HyperFlash 1.0 Resources
- Cypress Semiconductor Corporation®,
now a part of Infineon Technologies AG - Standards
- Application notes and other guidance:
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Discusses the layout considerations when placing a Cypress HyperFlash or HyperRAM device on a PCB.
- Guidance for 1st generation HyperRAM and HyperFlash
- Programming Guide for the Cypress HyperFlash Family
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Data sheets:
- 512 MBIT, 256 MBIT, 128 MBIT HyperFlash™ Family Datasheet
- S27KS
- S27KS0641 ( 64 Mbit, 1.8V)
- S27KL
- S27KL0641 ( 64 Mbit, 3V)
- S26KS
- S26KS128S (128 Mbit, 1.8V)
- S26KS256S (512 Mbit, 1.8V)
- S26KS512S (512 Mbit, 1.8V)
- S26KL
- S26KL128S (128 Mbit, 3V)
- S26KL256S (256 Mbit, 3V)
- S26KL512S (256 Mbit, 3V)
Infineon (Cypress) HyperRAM 1.0 Resources
- Cypress Semiconductor Corporation®,
now a part of Infineon Technologies AG - Standards
- Application notes and other guidance:
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Discusses the layout considerations when placing a Cypress HyperFlash or HyperRAM device on a PCB.
- Guidance for 1st generation HyperRAM and HyperFlash
- Product selector guide for all HyperRAM 1.0 devices
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Data sheets
- 3.0 V/1.8 V, 64 Mb (8 MB)/128 Mb (16 MB) HyperRAM™ Self-Refresh DRAM
- S27KS
- S27KS0641 ( 64 Mbit, 1.8V)
- S70KS1281 (128 Mbit, 1.8V)
- S27KL
- S27KL0641 ( 64 Mbit, 3.0V)
Infineon (Cypress) HyperMCP 1.0 Resources
- HyperMCP (Hyper Multiple Chip Package) devices embed a HyperRAM 1.0 die and HyperFlash 1.0 die in the same BGA24 package to reduce board area:
- Cypress Semiconductor Corporation®, now a part of Infineon Technologies AG
- Standards
- Application notes and other guidance:
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Discusses the layout considerations when placing a Cypress HyperFlash or HyperRAM device on a PCB.
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Data sheets
- HyperFlash™ and HyperRAM™ Multi-Chip Package 1.8V/3V
- Datasheets and guidance for 1st generation HyperRAM and HyperFlash
- S71KL
- S71Kl256SC0 (512 Mbit HyperFlash, 64 Mbit HyperRAM, 3V)
- S71Kl512SC0 (512 Mbit HyperFlash, 64 Mbit HyperRAM, 3V)
- S71KS
- S71KS512SC0 (512 Mbit HyperFlash, 64 Mbit HyperRAM, 1.8V)
Infineon Semper Flash with HyperBus Interface (HyperFlash 2.0) Resources
Infineon Semper NOR Flash with HyperBus interface has conformance with JEDEC xSPI Profile 2.0:
- Infineon Technologies AG
- Standards
- HyperBus™ Specification Low Signal Count, High Performance DDR Bus
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Semper Access Program
- Most of the product guidance and application notes can only be accessed by enrolling in the Semper Access Program
- AN224153 – Design and Layout Guide for Semper Flash Memory
- Requires enrolment with Semper Access Program
- AN223679 – SEMPER™ Flash conformance to JEDEC xSPI Standard
- Product selector guide for Semper Flash with HyperBus interface
- Semper Access Program
- Data sheets:
- Semper NOR Flash with HyperBus Interface Datasheet Brief
- S26HS256T/S26HS512T/S26HS01GT/S26HL256T/S26HL512T/S26HL01GT, 256-Mb (32-MB)/512-MB (64-MB)/1-GB (128-MB), HS-T (1.8-V)/HL-T (3.0-V), SEMPER(R) FLASH WITH HYPERBUS(TM) INTERFACE
- S36HS128T / S36HS256T / S36HS512T / S36HL128T / S36HL256T / S36HL512T, 128-Mb (16-MB), 256-Mb (32-MB), 512-Mb (64-MB), HS-T (1.8-V), HL-T (3.0-V) Semper Secure Flash with HyperBus Interface (Summary)
- Enrol into the Semper Access Program to get access to the full data sheets for:
- S26HS
- S26HS256T ( 256 Megabit, 1.8V)
- S26HS512T ( 512 Megabit, 1.8V)
- S26HS01GT (1024 Megabit, 1.8V)
- S26HL
- S26HL256T ( 256 Megabit, 3V)
- S26HL512T ( 512 Megabit, 3V)
- S26HL01GT (1024 Megabit, 3V)
- S36HS
- S36HS128T ( 128 Megabit, 1.8V) – Secure
- S36HS256T ( 256 Megabit, 1.8V) – Secure
- S36HS512T ( 512 Megabit, 1.8V) – Secure
- S36HL
- S36HL128T ( 128 Megabit, 3V) – Secure
- S36HL256T ( 256 Megabit, 3V) – Secure
- S36HL512T ( 512 Megabit, 1.8V) – Secure
- S26HS
Infineon SemperFlash with Octal Interface Resources
Infineon Semper NOR Flash with HyperBus interface has conformance with JEDEC xSPI Profile 1.0:
- Infineon Technologies AG Semper NOR Flash product page
- Standards
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Semper Access Program
- Most of the product guidance and application notes can only be accessed by enrolling in the Semper Access Program
- AN224153 – Design and Layout Guide for Semper Flash Memory
- Requires enrolment with Semper Access Program
- Semper Flash Conformance to JEDEC xSPI Standard – KBA227837
- Semper Access Program
- Data sheets:
- S28HS256T/S28HS512T/S28HS01GT/S28HL256T/S28HL512T/S28HL01GT, 256-Mb (32-MB)/512-MB (64-MB)/1-GB (128-MB), HS-T (1.8-V)/HL-T (3.0-V), SEMPER(R) FLASH WITH OCTAL INTERFACE
- S38HS128T / S38HS256T / S38HS512T / S38HL128T / S38HL256T / S38HL512T, 128-Mb (16-MB), 256-Mb (32-MB), 512-Mb (64-MB) HS-T (1.8-V), HL-T (3.0-V) Semper Secure Flash with Octal Interface (Summary)
- Enrol into the Semper Access Program to get access to the full data sheets for:
- S28HS
- S28HS256T ( 256 Megabit, 1.8V)
- S28HS512T ( 512 Megabit, 1.8V)
- S28HS01GT (1024 Megabit, 1.8V)
- S28HL
- S28HL256T ( 256 Megabit, 3V)
- S28HL512T ( 512 Megabit, 3V)
- S28HL01GT (1024 Megabit, 3V)
- S38HS
- S38HS128T ( 128 Megabit, 1.8V) – Secure
- S38HS256T ( 256 Megabit, 1.8V) – Secure
- S38HS512T ( 512 Megabit, 1.8V) – Secure
- S38HL
- S38HL128T ( 128 Megabit, 3V) – Secure
- S38HL256T ( 256 Megabit, 3V) – Secure
- S38HL512T ( 512 Megabit, 1.8V) – Secure
- S28HS
Infineon (Cypress) HyperRAM 2.0 with HyperBus Interface
Infineon (Cypress) HyperRAM 2.0 with HyperBus Interface implements a subset of the JEDEC xSPI Profile 2.0:
- Cypress Semiconductor Corporation®,
now a part of Infineon Technologies AG - Standards
- HyperBus™ Specification Low Signal Count, High Performance DDR Bus
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- Application notes and other guidance:
- Semper Access Program
- Most of the product guidance and application notes can only be accessed by enrolling in the Semper Access Program
- AN224153 – Design and Layout Guide for Semper Flash Memory
- Requires enrolment with Semper Access Program
- AN226576 – GETTING STARTED WITH HYPERRAM
- AN226137 – Migrating from S27KL0641/S27KS0641 to S27KL0642/S27KS0642
- Product selector guide for HyperRAM 2.0 with HyperBus Interface
- Semper Access Program
- Data sheets:
Infineon HyperRAM 2.0 with Octal Interface Resources
- Standards
- Infineon HYPERRAM 2.0 with Octal Interface.
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Semper Access Program
- Most of the product guidance and application notes can only be accessed by enrolling in the Semper Access Program
- AN224153 – Design and Layout Guide for Semper Flash Memory
- Requires enrolment with Semper Access Program
- Product selector guide for HyperRAM 2.0 with Octal SPI Interface
- Semper Access Program
- Data sheets:
ISSI HyperFlash 1.0 Resources
- Integrated Silicon Solution Inc. (ISSI)
- Standards
- Application notes and other guidance:
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Discusses the layout considerations when placing a Cypress HyperFlash or HyperRAM device on a PCB.
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Data sheets:
- IS26KL
- IS26KL128S ( 128 bit, 3V)
- IS26KL256S ( 256 bit, 3V)
- IS27KS
- IS26KS128S ( 128 bit, 1.8V)
- IS26KS256S (256 bit, 1.8V)
- IS26KL
ISSI HyperRAM 1.0 Resources
- Integrated Silicon Solution Inc. (ISSI)
- Standards
- Application notes and other guidance:
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Discusses the layout considerations when placing a Cypress HyperFlash or HyperRAM device on a PCB.
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Data sheets:
- IS66WVH
- IS66WVH8M8ALL ( 64 Mbit, single die, 3V) — Not recommended for new designs
- IS66WVH8M8BLL ( 64 Mbit, single die, 1.8V) — Not recommended for new designs
- IS66WVH8M8DALL ( 64 Mbit, single die, 3V)
- IS66WVH8M8DBLL ( 64 Mbit, single die, 1.8V)
- IS66WVH8M8EDALL ( 64 Mbit, single die, 1.8V, Internal ECC)
- IS66WVH8M8EDBLL ( 64 Mbit, single die, 3V, Internal ECC)
- IS66WVH16M8DALL (128 Mbit, dual die, 1.8V) — Not recommended for new designs
- IS66WVH16M8DBLL (128 Mbit, dual die, 3V) — Not recommended for new designs
- IS66WVH16M8DBLL (128 Mbit, single die, 1.8V)
- IS66WVH16M8DBLL (128 Mbit, single die, 3V)
- IS66WVH16M8EDALL (128 Mbit, single die, 1.8V, Internal ECC)
- IS66WVH16M8EDBLL (128 Mbit, single die, 3V, Internal ECC)
- IS66WVH32M8DALL (256 Megabit, single die, 1.8V)
- IS66WVH32M8DBLL (256 Megabit, single die, 3.0V)
- IS67WVH
- IS67WVH8M8ALL ( 64 Mbit, single die, 3V) — Not recommended for new designs
- IS67WVH8M8BLL ( 64 Mbit, single die, 1.8V) — Not recommended for new designs
- IS67WVH8M8DALL ( 64 Mbit, single die, 3V)
- IS67WVH8M8DBLL ( 64 Mbit, single die, 1.8V)
- IS67WVH8M8EDALL ( 64 Mbit, single die, 1.8V, Internal ECC)
- IS67WVH8M8EDBLL ( 64 Mbit, single die, 3V, Internal ECC)
- IS67WVH16M8DALL (128 Mbit, dual die, 1.8V) — Not recommended for new designs
- IS67WVH16M8DBLL (128 Mbit, dual die, 3V) — Not recommended for new designs
- IS67WVH16M8DBLL (128 Mbit, single die, 1.8V)
- IS67WVH16M8DBLL (128 Mbit, single die, 3V)
- IS67WVH16M8EDALL (128 Mbit, single die, 1.8V, Internal ECC)
- IS67WVH16M8EDBLL (128 Mbit, single die, 3V, Internal ECC)
- IS67WVH32M8DALL (256 Megabit, single die, 1.8V)
- IS67WVH32M8DBLL (256 Megabit, single die, 3.0V)
- IS66WVH
ISSI Octal Flash Resources
- Integrated Silicon Solution Inc. (ISSI)
- Standards
- Macronix OctaBus
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Data sheets:
- IS25LX
- IS25LX064 ( 64 Mbit, 3V)
- IS25LX128 ( 128 Mbit, 3V)
- IS25LX256 ( 256 Mbit, 3V)
- IS25LX512M ( 512 Mbit, 3V)
- IS25WX
- IS25WX064 ( 64 Mbit, 1.8V)
- IS25WX128 ( 128 Mbit, 1.8V)
- IS25WX256 ( 256 Mbit, 1.8V)
- IS25WX512M ( 512 Mbit, 1.8V)
- IS25LX
ISSI Octal RAM Resources
- Integrated Silicon Solution Inc. (ISSI)
- Standards
- Macronix OctaBus
- Application notes and other guidance:
- Data sheets
- IS66WVO
- IS66WVO8M8DALL ( 64 Mbit, single die, 1.8V)
- IS66WVO8M8DBLL ( 64 Mbit, single die, 3V)
- IS66WVO8M8EDALL ( 64 Mbit, single die, 1.8V, with ECC)
- IS66WVO8M8EDBLL ( 64 Mbit, single die, 3V, with ECC)
- IS66WVO16M8DALL ( 128 Mbit, single die, 1.8V)
- IS66WVO16M8DBLL ( 128 Mbit, single die, 3V)
- IS66WVO16M8EDALL ( 128 Mbit, single die, 1.8V, with ECC)
- IS66WVO16M8EDBLL ( 128 Mbit, single die, 3V, with ECC)
- IS66WVO32M8DALL ( 256 Mbit, single die, 1.8V)
- IS66WVO32M8DBLL ( 256 Mbit, single die, 3V)
- IS66WVO
ISSI Octal MCP Resources
- Integrated Silicon Solution Inc. (ISSI)
- Standards
- Macronix OctaBus for PSRAM
- Micron Xccela Bus for NOR Flash (JEDEC xSPI Profile 1.0)
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Data sheet
- Contact ISSI for datasheets:
- IS72WVO
- IS72WVO16M8AWO256 (128 Mbit Octal Flash, 256 Mbit Octal RAM, 1.8V)
- IS72WVO16M8BLO256 (128 Mbit Octal Flash, 256 Mbit Octal RAM, 3V)
- IS72WVO16M8AWO512 (128 Mbit Octal Flash, 512 Mbit Octal RAM, 1.8V)
- IS72WVO16M8BLO512 (128 Mbit Octal Flash, 512 Mbit Octal RAM, 3V)
- IS72WVO32M8AWO256 (256 Mbit Octal Flash, 256 Mbit Octal RAM, 1.8V)
- IS72WVO32M8BLO256 (256 Mbit Octal Flash, 256 Mbit Octal RAM, 3V)
- IS72WVO32M8AWO512 (256 Mbit Octal Flash, 512 Mbit Octal RAM, 1.8V)
- IS72WVO32M8BLO512 (256 Mbit Octal Flash, 512 Mbit Octal RAM, 3V)
- IS72WVO
- Contact ISSI for datasheets:
JSC OctaRAM Resources
- Jeju Semiconductor Corp (JSC)
- JSC OctaRAM product page
- Standards
- Macronix OctaBus
- Application notes and other guidance:
- Data sheet
- Contact JSC for data sheets
- JSC64SSP ( 64 Mbit, 1.8V)
- JSC64SSP8AGDY-50M (24BGA 6mmx8mm)
- JSC64SSP8AGDY-50I (24BGA 6mmx8mm)
- JSC64SSP8AGDT-50I (49BGA 4mmx4mm)
- JSC64SSP8AGI (KGD)
- JSC64SSP8AGM (KGD)
- JSC64SSU ( 64 Mbit, 3V)
- JSC64SSU8AGDY-75M (24BGA 6mmx8mm)
- JSC64SSU8AGDY-75I (24BGA 6mmx8mm)
- JSC64SSU8AGDT-75I (49BGA 4mmx4mm)
- JSC64SSU8AGI (KGD)
- JSC64SSU8AGM (KGD)
- JSC28SSP (128 Mbit, 1.8V)
- JSC28SSP8AGDY-50M (24BGA 6mmx8mm)
- JSC28SSP8AGDY-50I (24BGA 6mmx8mm)
- JSC28SSP8AGDT-50I (49BGA 4mmx4mm)
- JSC28SSP8AGI (KGD)
- JSC28SSP8AGM (KGD)
- JSC28SSU(128 Mbit, 3V)
- JSC28SSU8AGDY-75M (24BGA 6mmx8mm)
- JSC28SSU8AGDY-75I (24BGA 6mmx8mm)
- JSC28SSU8AGDT-75I (49BGA 4mmx4mm)
- JSC28SSU8AGI (KGD)
- JSC28SSU8AGM (KGD)
- JSC64SSP ( 64 Mbit, 1.8V)
- Contact JSC for data sheets
Macronix OctaBus™ Memory Resources
- Macronix International Co., Ltd
- Macronix OctaBus™ memory product page (LM/LW/UM/UW)
- Standards
- Macronix OctaBus™
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- Application notes and other guidance:
- Contact Macronix.
- Data sheet
- MX25LM
- MX25LM12845G ( 128 Mbit, 3.0V)
- MX25LM25645G ( 256 Mbit, 3.0V)
- MX25LM51245G ( 512 Mbit, 3.0V)
- MX25LW
- MX25LW51245G ( 512 Mbit, 3.0V)
- MX25UM
- MX25UM12845G ( 128 Mbit, 1.8V)
- MX25UM25345G ( 256 Mbit, 1.8V)
- MX25UM25645G ( 256 Mbit, 1.8V)
- MX25UM51245G ( 512 Mbit, 1.8V)
- MX25UM51245G-EX ( 512 Mbit, 1.8V)
- MX25UM51345G ( 512 Mbit, 1.8V)
- MX25UW12345G ( 128 Mbit, 1.8V)
- MX25UW
- MX25UW12845G ( 128 Mbit, 1.8V)
- MX25UW12A45G ( 128 Mbit, 1.8V)
- MX25UW25345G ( 256 Mbit, 1.8V)
- MX25UW25645G ( 256 Mbit, 1.8V)
- MX25UW51245G ( 512 Mbit, 1.8V)
- MX25UW51345G ( 512 Mbit, 1.8V)
- MX25UW6345G ( 64 Mbit, 1.8V)
- MX25UW6445G ( 64 Mbit, 1.8V)
- MX66LM
- MX66LM1G45G ( 1024 Mbit, 3.0V)
- MX66LM2G45G ( 2048 Mbit, 3.0V)
- MX66LW1G45G ( 1024 Mbit, 1.8V)
- MX66LW
- MX66LW2G45G ( 2048 Mbit, 1.8V)
- MX66UM
- MX66UM1G45G ( 1024 Mbit, 1.8V)
- MX25LM
Macronix OctaMCP™ Resources
- Macronix International Co., Ltd
- Standards
- Macronix OctaBus™
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- Application notes and other guidance:
- Contact Macronix.
- Data sheets
- Contact Macronix
- MX65L
- MX65L12A64AAXDI00 (512 Mbit NOR Flash, 64 PSRAM, 3V)
- MX65U
- MX65U12A64AAXDI00 (512 Mbit NOR Flash, 64 PSRAM, 1.8V)
Micron Xccela Flash Resources
- Micron Technology, Inc.
- Micron Xccela Flash Part Catalog (2 pages of parts)
- Standards
- Micron Xccela Bus
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Micron Xccela Flash Product Flyer
- Xccela Consortium
- Contact Micron for printed circuit board guidance.
- Data sheets / Product pages
- MT35XL
- MT35XL256ABA1G12-0AAT ( 256 Mbit, 3.0V, x1 Boot, Automotive)
- MT35XL256ABA2G12-0AAT ( 256 Mbit, 3.0V, x8 Boot, Automotive)
- MT35XL512ABA1G12-0AAT ( 512 Mbit, 3.0V, x1 Boot, Automotive)
- MT35XL512ABA1G12-0AUT ( 512 Mbit, 3.0V, x1 Boot, Automotive)
- MT35XL512ABA1G12-0SIT ( 512 Mbit, 3.0V, x1 Boot, Embedded)
- MT35XL512ABA2G12-0AAT ( 512 Mbit, 3.0V, x8 Boot, Automotive)
- MT35XL512ABA2G12-0AUT ( 512 Mbit, 3.0V, x8 Boot, Automotive)
- MT35XL512ABA2G12-0SIT ( 512 Mbit, 3.0V, x8 Boot, Embedded)
- MT35XL01GBBA1G12-0AAT (1024 Mbit, 3.0V, x1 Boot, Automotive)
- MT35XL01GBBA1G12-0SIT (1024 Mbit, 3.0V, x1 Boot, Embedded)
- MT35XL01GBBA2G12-0AAT (1024 Mbit, 3.0V, x8 Boot, Automotive)
- MT35XL01GBBA2G12-0SIT (1024 Mbit, 3.0V, x8 Boot, Embedded)
- MT35XL02GCBA1G12-0SIT (2048 Mbit, 3.0V, x1 Boot, Embedded)
- MT35XL02GCBA2G12-0SIT (2048 Mbit, 3.0V, x8 Boot, Embedded)
- MT35XU
- MT35XU256ABA1G12-0AAT ( 256 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU256ABA1G12-0AUT ( 256 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU256ABA2G12-0AAT ( 256 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU256ABA2G12-0AUT ( 256 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU512ABA1G12-0AAT ( 512 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU512ABA1G12-0AUT ( 512 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU512ABA1G12-0SIT ( 512 Mbit, 1.8V, x1 Boot, Embedded)
- MT35XU512ABA2G12-0AAT ( 512 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU512ABA2G12-0AUT ( 512 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU512ABA2G12-0SIT ( 512 Mbit, 1.8V, x8 Boot, Embedded)
- MT35XU01GBBA1G12-0AAT (1024 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU01GBBA1G12-0AUT (1024 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU01GBBA1G12-0SIT (1024 Mbit, 1.8V, x1 Boot, Embedded)
- MT35XU01GBBA2G12-0AAT (1024 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU01GBBA2G12-0AUT (1024 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU01GBBA2G12-0SIT (1024 Mbit, 1.8V, x8 Boot, Embedded)
- MT35XU02GCBA1G12-0AAT (2048 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU02GCBA1G12-0AUT (2048 Mbit, 1.8V, x1 Boot, Automotive)
- MT35XU02GCBA1G12-0SIT (2048 Mbit, 1.8V, x1 Boot, Embedded)
- MT35XU02GCBA2G12-0AAT (2048 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU02GCBA2G12-0AUT (2048 Mbit, 1.8V, x8 Boot, Automotive)
- MT35XU02GCBA2G12-0SIT (2048 Mbit, 1.8V, x8 Boot, Embedded)
- MT35XL
Winbond HyperRAM 1.0 Resources
- Winbond
- Standards
- Application notes and other guidance:
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Discusses the layout considerations when placing a Cypress HyperFlash or HyperRAM device on a PCB.
- Cypress AN211622 – HyperFlash and HyperRAM Layout Guide
- Data sheets / product pages
- W955D8MBY (32 Mbit, 1.8V)
- W955D8MBYA6I
- W955D8MBY (32 Mbit, 1.8V)
Winbond HyperRAM 2.0 Resources
- Winbond
- Standards
- HyperBus™ Specification Low Signal Count, High Performance DDR Bus
- JEDEC JESD251 – EXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, Version 1.0
- JEDEC JESD216D – Serial Flash Discoverable Parameters (SFDP)
- JEDEC JESD252 – Serial Flash Reset Signaling Protocol
- Application notes and other guidance:
- Semper Access Program
- Most of the product guidance and application notes can only be accessed by enrolling in the Semper Access Program
- AN224153 – Design and Layout Guide for Semper Flash Memory
- Requires enrolment with Semper Access Program
- Semper Access Program
- Data sheets / product pages
Winbond Octal NAND resources
- Winbond
- Standards
- None.
- Application notes and other guidance
- Datasheets / product pages
SLL can advise you on COTS development board options for many of the supported memory devices on Intel, Microchip (Microsemi) and Xilinx FPGA’s. SLL provides free trials with reference designs. SLL reference designs have been downloaded many thousands of times. You can request Trial IP here. You can read about some of the available COTS development board options here. Or contact SLL at info@synaptic-labs.com.
