SLL's embedded software innovation has been recognised by our customers and partners. Major FPGA, memory, and development board makers now officially partner with SLL. This ensures SLL IP is validated on a wide range of physical devices. SLL customers are located in most geographical regions, and include Fortune Global 500's, government agencies, and SME's from USA and Canada to China.
SLL product portfolio page for
FPGA and SoC FPGA device families and development boards
SLL is an Intel Partner Alliance member
SLL is an Infineon Associated Partner
SLL is Trenz Electronic’s partner
SLL is JSC’s partner
SLL is GigaDevice’s partner
SLL is Winbond’s partner
SLL collaborates closely with Macronix
Overview of SLL's support for Intel FPGA and SoC FPGA devices
SLL supports the following products and services on Intel FPGA and SoC FPGA device families:
SLL IP support for Intel FPGA and SoC device families
Various of SLL’s IP has been ported to, and physically tested on, a broad range of Intel FPGA and SoC FPGA device variants, including:
- MAX 10
- Cyclone IV
- Cyclone 10 LP
- Cyclone 10 GX
- Cyclone V
- Cyclone V SoC
- Arria 10
- Arria 10 SoC
- Stratix 10
Other device families may be available on request.
Please contact SLL at info@synaptic-labs.com if you want support for other Intel devices.
Trials of SLL IP for Intel FPGA and SoC FPGA
To request a Trial of SLL’s IP for Intel FPGA and SoC FPGA, please visit here.
SLL IP supports Intel FPGA and SoC FPGA on Commercial-off-the-shelf (COTS) boards
Various of SLL’s IP supports, and has reference designs available for:
SLL memory device support on FPGA and SoC FPGA
SLL’s memory controller portfolio supports a very broad range of memory devices from many memory vendors.
xSPI MBMC IP currently supports, or will very soon support:
- AP Memory® Xccela™ PSRAM, OctaRAM™ and QSPI DDR PSRAM
- Everspin® SPI Industrial STT-MRAM Persistent Memory (EM064LX)
- Gigadevice® NOR Flash (GD25X, GD25LX)
- Infineon® HyperRAM™ 2.0 with HyperBus™ Interface and HyperRAM™ 2.0 with Octal Interface
- Infineon® Semper™ Flash with HyperBus™ Interface and Semper™ Flash with Octal Interface
- Infineon® (Cypress®) HyperFlash™ 1.0
- Integrated Silicon Solution Inc.® (ISSI) HyperRAM™ 1.0 (Revision D dies or higher only), HyperRAM 1.0™ with inbuilt ECC and HyperFlash™ 1.0
- ISSI® x8 Octal RAM and Octal RAM with inbuilt ECC
- ISSI® x8 Octal Flash (NOR Flash)
- ISSI® x8 Octal MCP
- Jeju Semiconductor Corp® (JSC) OctaRAM™
- Macronix® OctaBus™ / OctaFlash™ (NOR Flash)
- Micron® Xccela™ Flash (NOR Flash)
- Winbond® HyperRAM™ 1.0 and HyperRAM™ 2.0
- Winbond® OctalNAND for use with Linux (W35N01JW, W35N02JW, W35N04JW)
Intel Cyclone 10 LP Evaluation Kit
The Intel Cyclone 10 LP Evaluation Kit features:
- Intel 25K LE Cyclone 10 LP FPGA
- On-board USB Blaster II
- 10/100/1000Mbits Ethernet
- 12 Pin Digilent Pmod Compatible connector
- ISSI 1.8V 128 Mbit HyperRAM 1.0 device (166 MHz DDR)
Intel distributes a trial copy of SLL’s HyperBus Memory Controller (HBMC v3.1.x) IP as part of Intel’s official Kit Collateral for this board.
SLL’s provides several reference designs with a Trial IP of SLL’s xSPI MBMC memory controller to customers for use with this low cost evaluation board.
SLL xSPI MBMC support for Intel boards
Status of board testing and qualification performed by SLL with SLL’s xSPI MBMC memory controller:
- Intel Corporation
- Cyclone 10 LP Evaluation Kit – Validated
- Multiple Cyclone 10 LP Evaluation Kits hand modified with AP Memory Xccela PSRAM – Validated
- Multiple Cyclone 10 LP Evaluation Kits hand modified with AP Memory OctaRAM – Pending
- Multiple Cyclone 10 LP Evaluation Kits hand modified with JSC OctaRAM – Validated
- MAX® 10 FPGA 10M50 Evaluation Kit
- connected to a proprietary Pmod memory board – Validated
- Cyclone 10 LP Evaluation Kit – Validated
Contact SLL for more information: info@synaptic-labs.com
